NSN 5305-01-109-2172
High Torque Screw
Between 4.165 inches and 4.185 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, locking feature: detent ball grip.
Manufacturer part number MS27577-5-59 for national stock number 5305011092172.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-109-2172.
-
MPN or Model
MS27577-5-59
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.461 inches and 0.497 inches -
Fastener Length
Between 4.165 inches and 4.185 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 3.688 inches and 3.704 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.050 inches first hole and 4.080 inches first hole -
Surface Finish
63.0 microinches head -
Material
Steel -
Material Specification
Mil-b-83050 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-132-2539 MPN MS17350N24Electrical Connector Cover
- 5935-00-142-0423 MPN MS3121F14-15PElectrical Plug Connector
- 5935-00-159-0172 MPN MS27352A20Electrical Connector Cover
- 5935-00-159-0174 MPN MS27352A16Electrical Connector Cover
- 5935-00-169-5892 MPN MS27502B21CElectrical Connector Cover
- 4820-00-181-8819 MPN MS28771-16ALCheck Valve
- 5905-00-185-8513 MPN MS90194-73Composition Fixed Resistor
- 5935-00-227-9767 MPN MS24241M19-20VElectrical Receptacle Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-109-2172 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27577-5-59 | Military Standards |