NSN 5305-01-110-1898
High Torque Screw
Between 0.798 inches and 0.828 inches fastener length, flat countersunk head style, 0.564 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number HT4072-6D6-7 for national stock number 5305011101898.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-110-1898.
-
MPN or Model
HT4072-6D6-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 0.798 inches and 0.828 inches -
Head Style
Flat countersunk -
Head Diameter
0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.673 inches first hole and 0.713 inches first hole -
Material
Stainless steel -
Material Specification
23-112 fscm 76301 mfr ref single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Mil-c-83488 type 2 class 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-01-626-2726 MPN 99-3711Aircraft Maintenance Fixture
- 5305-00-519-7205 MPN HT4024L6-11Close Tolerance Screw
- 5305-00-815-5259 MPN 32-15561-5Machine Screw
- 5305-00-905-5568 MPN 3006T69P01Socket Head Cap Screw
- 5305-01-138-7739 MPN HT4041-4-11-5Close Tolerance Screw
- 5305-01-191-0380 MPN LE112-0023-0106Machine Screw
- 5305-01-193-1611 MPN HT8137-4-4Close Tolerance Screw
- 5305-01-195-0057 MPN SC1786RV3-07LClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-110-1898 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4072-6D6-7 | Huck International, Inc. |
HT4072-6D6-7 | Arconic Global Fasteners & Rings, |
HT4072-6D6-7 | Hi-shear Corporation |
HT4072-6D6-7 | Lisi Aerospace Canada Corp |
HT4072-6D6-7 | Sps Technologies, Llc |
3M938-6D6-7 | Boeing Company, The |
HT4072-6D6-7 | Alcoa Global Fasteners, Inc. |
HT4072-6D6-7 | Sps Technologies, Llc |
3M938-6D6-7 | Sps Technologies, Llc |
3M938-6D6-7 | Fastener Innovation Technology, Inc. |
3M938-6D6-7 | Tranter Mfg Co |
HT4072-6D6-7 | Huck Intl Inc |