NSN 5305-01-111-2309
Bolt Stove
Between 0.418 inches and 0.438 inches fastener length, flat countersunk head style, between 0.285 inches and 0.332 inches head diameter, internal drive style: cross recess type ia.
Manufacturer part number 2510-0104 for national stock number 5305011112309.
Datasheet
-
Product description
Machine Screw NSN 5305-01-111-2309.
-
MPN or Model
2510-0104
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.356 inches and 0.438 inches -
Fastener Length
Between 0.418 inches and 0.438 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.285 inches and 0.332 inches -
Internal Drive Style
Cross recess type ia -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Screw Material
Steel comp 301 or steel comp 302 or steel comp 302b or steel comp 303 or steel comp 303se or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 308 or steel comp 309 or steel comp 309s or steel comp 310 or steel comp 310s or steel comp 314 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 347 or steel comp 348 or steel comp 385 -
Screw Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 5950-00-139-9837 MPN 9100-1732Radio Frequency Coil
- 5935-00-184-7745 MPN 1250-0882Electrical Plug Connector
- 5950-00-224-3770 MPN 03205-80012Electrical Coil
- 5905-00-243-1450 MPN 0757-0932Film Fixed Resistor
- 5905-00-295-5862 MPN 400DS414Inductive Wire Wound Fixed Resistor
- 5935-00-368-1776 MPN 1200-0474Plug-in Electronic Components Socket
- 5930-00-421-6388 MPN 3100-2120Rotary Switch
- 5935-00-439-0262 MPN 1250-0186Electrical Receptacle Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-111-2309 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
2510-0104 | Keysight Technologies, Inc. |
2510-0104 | Hewlett-packard Company |