NSN 5305-01-111-7263
High Torque Screw
Between 0.826 inches and 0.856 inches fastener length, flat countersunk head style, between 0.350 inches and 0.399 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 106385PT-4-7 for national stock number 5305011117263.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-111-7263.
-
MPN or Model
106385PT-4-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 0.826 inches and 0.856 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-225-9874 MPN SFH22D6A12Machine Screw
- 5305-00-321-9892 MPN 330-1716-260Machine Screw
- 5305-00-450-7459 MPN NAS1125C1HClose Tolerance Screw
- 5305-00-515-8983 MPN 5A12213Socket Head Cap Screw
- 5305-00-519-6530 MPN 639433Setscrew
- 5305-00-559-4899 MPN 66904H7-28Shoulder Screw
- 5305-00-680-6395 MPN NAS1203-5Close Tolerance Screw
- 5305-00-932-1658 MPN 20097L4C20DSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-111-7263 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106385PT-4-7 | Sps Technologies, Llc |
106385PT4-7 | Sps Technologies, Llc |
106385PT-4-7 | Sps Technologies, Llc |
106385FT-4-7 | Sps Technologies, Llc |
Stock Check
![](/public/images/partscage_shelf3.png)