NSN 5305-01-111-9153
High Torque Screw
Between 1.475 inches and 1.495 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, locking feature: detent ball grip.
Manufacturer part number AS221-04-0845 for national stock number 5305011119153.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-111-9153.
-
MPN or Model
AS221-04-0845
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.540 inches and 0.570 inches -
Fastener Length
Between 1.475 inches and 1.495 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2480 inches and 0.2492 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.835 inches and 0.855 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 631 spring or steel comp 302 spring -
Material Specification
Qq-s-763 federal specification single material response locking feature -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response or fps-3007, cage84256 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-043-7714 MPN AS169-6-63Close Tolerance Screw
- 5305-01-183-5869 MPN AS292-4-20Close Tolerance Screw
- 5305-01-193-7612 MPN AS292-5-15Close Tolerance Screw
- 5305-01-414-7520 MPN GB510CG4-22Close Tolerance Screw
- 5306-01-004-0870 MPN AS194-5-13Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-111-9153 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS221-04-0845 | Avibank Mfg., Inc. |
AS221-04-0845 | Avibank Mfg., Inc. |
AS221-04-0845 | Avibank Mfg., Inc. |