NSN 5305-01-112-1704
High Torque Screw
Between 1.063 inches and 1.093 inches fastener length, flat countersunk head style, between 0.510 inches and 0.564 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number GB510CU6-9 for national stock number 5305011121704.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-112-1704.
-
MPN or Model
GB510CU6-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.491 inches and 0.541 inches -
Fastener Length
Between 1.063 inches and 1.093 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.510 inches and 0.564 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-007-5924 MPN A51B96178-11Tip Antenna Cover
- 1560-00-018-2336 MPN 128WM10198-1Wing Fitting
- 1560-00-047-1959 MPN 89P1156-1Cover Assembly
- 1560-00-066-2934 MPN 123BM10524-1Hi Fitting Assembly
- 1560-00-165-7588 MPN 87536-1Aircraft Floor
- 1560-00-216-4595 MPN 37E52560-2Maneuv Tip Assembly
- 1680-00-232-7913 MPN 1128AV43022-5Panel And Switches
- 5935-00-344-1953 MPN GC837F80P10Electrical Connector Backshell
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-112-1704 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB510CU6-9 | Northrop Grumman Systems Corporation |
HT291-6-9 | Hi-shear Corporation |
CB510CU6-9 | Hi-shear Corporation |
HT291-6-9 | Hi-shear Corporation |
GB510CU6-9 | Northrop Grumman Systems Corporation |