NSN 5305-01-115-1847
Tap Bolt
Between 3.1246 inches and 3.1878 inches fastener length, hexagon head style, 0.3906 inches head height, width between flats: between 0.875 inches and 0.9375 inches .
Manufacturer part number 10916561 for national stock number 5305011151847.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-01-115-1847.
-
MPN or Model
10916561
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 2.625 inches and 2.6875 inches -
Fastener Length
Between 3.1246 inches and 3.1878 inches -
Head Style
Hexagon -
Head Height
0.3906 inches -
Width Between Flats
Between 0.875 inches and 0.9375 inches -
Thread Diameter
0.625 inches -
Thready Qty Per Inch (tpi)
11 -
Material
Steel -
Material Specification
Qq-s-633 federal specification single material response -
Surface Treatment
Cadmium or zinc -
Surface Treatment Specification
Qq-p-416 federal specification 1st treatment response or qq-z-325, type 2, class 3 federal specification 1st treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-068-6178 MPN 8701252Electrical Connector Insert
- 5930-00-741-2642 MPN 7388813Pressure Switch
- 5975-01-088-6020 MPN 10359788Conduit Chase Nipple
- 5935-01-115-3375 MPN 12298227Connector Adapter
- 5935-01-143-9560 MPN 12306792-3Electrical Receptacle Connector
- 5975-01-357-1564 MPN 12346525Electrical-electronic Equipment Panel
- 5935-01-388-7318 MPN 12414262Electrical Receptacle Connector
- 4820-01-443-9908 MPN 12417562Check Valve
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-01-115-1847 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
10916561 | U S Army Tank Automotive Command |