NSN 5305-01-118-4927
High Torque Screw
Between 2.130 inches and 2.177 inches fastener length, flat countersunk head style, between 0.325 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1894 inches .
Manufacturer part number H148-3-29 for national stock number 5305011184927.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-118-4927.
-
MPN or Model
H148-3-29
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.308 inches and 0.375 inches -
Fastener Length
Between 2.130 inches and 2.177 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.325 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 1.802 inches and 1.822 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas672 assn standard 1st treatment response or mil-c-8837, type 2, class 2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-354-5149 MPN HT4024L4-7Close Tolerance Screw
- 5305-01-054-6240 MPN C9535-6-27Close Tolerance Screw
- 5305-01-056-4415 MPN VT1693F3-2Close Tolerance Screw
- 5305-01-142-7224 MPN HT4020-5-12AYShoulder Screw
- 5305-01-143-4087 MPN HT4020-5-13AXShoulder Screw
- 5305-01-146-1723 MPN HT4049-6-14XShoulder Screw
- 5305-01-246-3871 MPN SC1779-4-12Close Tolerance Screw
- 5305-01-381-5753 MPN SC3102-5-35Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-118-4927 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
H148-3-29 | Huck International, Inc. |
GB510CE3-29 | Northrop Grumman Systems Corporation |
106706H-3-A29 | Sps Technologies, Llc |
HT8171-3-29 | Alcoa Global Fasteners, Inc. |
106706H-3-A29 | Sps Technologies, Llc |
GB510CE3-29 | Arconic Global Fasteners & Rings, |
GB510CE3-29 | Sps Technologies, Llc |
GB510CE3-29 | Hi-shear Corporation |
GB510CE3-29 | Lisi Aerospace Canada Corp |
H148-3-29 | Huck Intl Inc |