NSN 5305-01-118-8867
High Torque Screw
Between 1.612 inches and 1.659 inches fastener length, flat countersunk head style, between 0.390 inches and 0.395 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HT239P8-4-21 for national stock number 5305011188867.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-118-8867.
-
MPN or Model
HT239P8-4-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.290 inches and 0.357 inches -
Fastener Length
Between 1.612 inches and 1.659 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.390 inches and 0.395 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
63.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-356-1623 MPN LS15265V3-2Close Tolerance Screw
- 5305-00-484-1963 MPN LS15266V3-5Close Tolerance Screw
- 5305-00-805-7551 MPN SC111-4-4Machine Screw
- 5305-01-084-1907 MPN HT4010-7-9Shoulder Screw
- 5305-01-173-3603 MPN HT4048-3-4Close Tolerance Screw
- 5305-01-211-0682 MPN BACB30LH3U29Close Tolerance Screw
- 5305-01-254-1365 MPN HT4057-5L-8AClose Tolerance Screw
- 5305-01-264-3756 MPN SC1785-06-48Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-118-8867 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT239P8-4-21 | Hi-shear Corporation |
106750-4-21 | Sps Technologies, Llc |
HT8043-4-21 | Arconic Global Fasteners & Rings, |
A147-4-21 | Huck International, Inc. |
BM19025-4-21 | Huck International, Inc. |
HT239P8-4-21 | Lisi Aerospace Canada Corp |
HT8043-4-21 | Alcoa Global Fasteners, Inc. |
GB510L4-21 | Northrop Grumman Systems Corporation |
A147-4-21 | Huck Intl Inc |
BM19025-4-21 | Huck Intl Inc |