NSN 5305-01-119-1408
High Torque Screw
Between 1.451 inches and 1.481 inches fastener length, flat countersunk head style, between 0.825 inches and 0.890 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number C7984-7-15 for national stock number 5305011191408.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-119-1408.
-
MPN or Model
C7984-7-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.913 inches and 0.963 inches -
Fastener Length
Between 1.451 inches and 1.481 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.825 inches and 0.890 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 0.518 inches and 0.538 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-268-2047 MPN 12S128-7Aircraft Structural Component Support
- 5305-00-486-2592 MPN AIC1023H10-16Close Tolerance Screw
- 5305-00-802-1826 MPN 51B221-10Close Tolerance Screw
- 5305-00-815-9187 MPN 53B333-12Machine Screw
- 5305-00-948-4129 MPN NAS1102-3-11Machine Screw
- 5305-00-993-8730 MPN 51B221-16Machine Screw
- 5305-01-006-9329 MPN LS15263-3-6Machine Screw
- 5305-01-114-0607 MPN NAS1101E4-14Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-119-1408 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C7984-7-15 | Lockheed Martin Corporation |
AIC984-7-15 | Sps Technologies, Llc |
PBF1165-7-15 | Sps Technologies, Llc |
VT1693F7-15 | Alcoa Global Fasteners, Inc. |
C7984-7-15 | Arconic Global Fasteners & Rings, |
C7984-7-15 | Huck International, Inc. |
C7984-7-15 | Sps Technologies, Llc |
C7984-7-15 | Sps Technologies, Llc |
AIC984-7-15P | Sps Technologies, Llc |