NSN 5305-01-119-8357
High Torque Screw
Furnished with one cres spindle.
Manufacturer part number AS205-10-24 for national stock number 5305011198357.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-119-8357.
-
MPN or Model
AS205-10-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.606 inches and 0.637 inches -
Fastener Length
2.427 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.313 inches and 0.328 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.6236 inches and 0.6241 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.625 inches -
Grip Length
Between 1.500 inches and 1.516 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
170000 pounds per square inch -
Hardness Rating
38.0 rockwell c fastener and 45.0 rockwell b fastener -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.172 inches first hole and 2.192 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 630 spring or steel comp 302 spring -
Material Specification
Ams 5673 assn standard 1st material response spring or qq-w-423 federal specification 2nd material response spring -
Surface Treatment
Passivate spring -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response spring -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-009-6565 MPN GA800MT24-12Electrical Connector Backshell
- 1680-00-052-6229 MPN 123AM40062-1Cargo Block Assy
- 5905-00-058-9455 MPN GR816AC102Precision Wire Wound Variable Resistor
- 1680-00-075-0761 MPN 123ABM10070-3Turntable Roller
- 4820-00-076-0326 MPN 128SCH159-1Check Valve
- 5940-00-110-3089 MPN 547954-151Terminal Board
- 5940-00-168-9042 MPN 1128B42252-15Radio Frequency Grounding Contact Strip
- 5935-00-261-7962 MPN GC829R1Receptacle Dummy Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-119-8357 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS205-10-24 | Avibank Mfg., Inc. |
CA2658-10-24 | Arconic Global Fasteners & Rings, |
GB511DW10-24 | Northrop Grumman Systems Corporation |