NSN 5305-01-119-8894
High Torque Screw
Between 1.110 inches and 1.150 inches fastener length, pan no. 2 head style, between 0.400 inches and 0.420 inches head diameter, head height: between 0.050 inches and 0.070 inches .
Manufacturer part number 196B7826 for national stock number 5305011198894.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-119-8894.
-
MPN or Model
196B7826
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.380 inches and 0.440 inches -
Fastener Length
Between 1.110 inches and 1.150 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.400 inches and 0.420 inches -
Head Height
Between 0.050 inches and 0.070 inches -
Grip Diameter
Between 0.3115 inches and 0.3125 inches -
Internal Drive Style
Slot -
Thread Diameter
0.312 inches -
Grip Length
Between 0.710 inches and 0.730 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel comp 304 -
Material Specification
Qq-s-763 cond a federal specification single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4920-01-043-9808 MPN 154L806Test Set Adapter
- 1680-01-551-1100 MPN 10055307Electrical-electronic Equipment Control Panel
- 5905-00-111-1397 MPN 436-6636Film Fixed Resistor
- 5905-00-434-5406 MPN 406-3898Nonprecision Nonwire Wound Variable Resistor
- 5935-00-517-8519 MPN 10135481Electrical Plug Connector
- 5935-01-044-9202 MPN 10131451Electrical Receptacle Connector
- 5935-01-085-3308 MPN 10131678Electrical Receptacle Connector
- 5905-01-168-3057 MPN 10130799Wire Wound Fixed Resistor
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-119-8894 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
196B7826 | General Dynamics-ots, Inc. |
10115073 | Nimikkeistokeskus Ncb Finland |