NSN 5305-01-122-0453
Panel Screw
0.875 inches fastener length, flat chamfer head style, between 0.262 inches and 0.270 inches head diameter, head height: between 0.159 inches and 0.164 inches .
Manufacturer part number 392617-1 for national stock number 5305011220453.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-122-0453.
-
MPN or Model
392617-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.270 inches and 0.290 inches -
Fastener Length
0.875 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.262 inches and 0.270 inches -
Head Height
Between 0.159 inches and 0.164 inches -
First Diameter From Head
0.120 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.585 inches and 0.605 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 302 or steel comp 304 or steel comp 305 or steel comp 316 or steel comp xm-7 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5985-00-003-8794 MPN 397101-1Waveguide Assembly
- 5935-00-238-7237 MPN 363370-3Electrical Receptacle Connector
- 5930-00-256-3403 MPN 367948-4Rotary Switch
- 5985-00-357-1350 MPN DMNI47-4Antenna
- 5905-00-410-3960 MPN 950003-155Film Fixed Resistor
- 5950-00-421-4715 MPN 362233-1Radio Frequency Coil
- 5985-00-477-0761 MPN 403732-1Radio Frequency Rotary Coupler
- 5985-00-787-8277 MPN DMC7-7Antenna
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-122-0453 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
392617-1 | Edo Llc |
392617-1 | Edo Llc |