NSN 5305-01-124-3085
High Torque Screw
Between 1.063 inches and 1.110 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number NAS336CA-10 for national stock number 5305011243085.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-124-3085.
-
MPN or Model
NAS336CA-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.615 inches and 0.682 inches -
Fastener Length
Between 1.063 inches and 1.110 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.375 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Width Across Flats
Between 0.219 inches and 0.221 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas336 professional/industrial association standard
More from these suppliers
- 5940-01-425-7415 MPN NAS1063A14-423Terminal Board Marker Strip
- 5940-01-451-2667 MPN NAS1063A10-105BRTerminal Board Marker Strip
- 5935-01-625-8647 MPN MS27468T21F39SElectrical Receptacle Connector
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5305-00-026-1996 MPN NAS1352C06H14Socket Head Cap Screw
- 5305-00-055-2797 MPN MS24673-9Socket Head Cap Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-144-8446 MPN NAS1146-6Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-124-3085 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS336CA-10 | National Aerospace Standards |
Stock Check
- NE: 29
- NS: 5