NSN 5305-01-126-1623
High Torque Screw
Between 0.535 inches and 0.565 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, locking feature: strip threads.
Manufacturer part number NAS1164E2L for national stock number 5305011261623.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-126-1623.
-
MPN or Model
NAS1164E2L
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 0.535 inches and 0.565 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Locking Feature
Strip threads -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Plastic locking feature -
Material Specification
Ams5737 assn standard single material response fastener -
Surface Treatment
Passivate fastener -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response fastener -
Thread Series Designator
Unjf -
Specification Data
80205-nas1164 professional/industrial association standard
More from these suppliers
- 5940-01-455-2460 MPN NAS1063A10-105BDTerminal Board Marker Strip
- 5940-01-381-7166 MPN NAS1063B204-215Terminal Board Marker Strip
- 5305-00-051-2334 MPN NASM51958Machine Screw
- 5305-00-058-4010 MPN MS24694S118Machine Screw
- 5305-00-061-8425 MPN NAS600-13PMachine Screw
- 5305-00-088-9668 MPN MS24693-C54Machine Screw
- 5305-00-150-0846 MPN NAS1189E02T14LSocket Head Cap Screw
- 5305-00-159-5570 MPN NAS1405-18Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-126-1623 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1164E2L | National Aerospace Standards |