NSN 5305-01-126-4721
High Torque Screw
Between 3.500 inches and 3.530 inches fastener length, flat countersunk head style, between 0.880 inches and 0.890 inches head diameter, grip diameter: between 0.4365 inches and 0.4370 inches .
Manufacturer part number ST3M714-7D49 for national stock number 5305011264721.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-126-4721.
-
MPN or Model
ST3M714-7D49
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.428 inches and 0.478 inches -
Fastener Length
Between 3.500 inches and 3.530 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.880 inches and 0.890 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
Between 3.052 inches and 3.072 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.370 inches first hole and 3.410 inches first hole -
Material
Stainless steel -
Material Specification
23-112 fscm 76301 mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-406-3080 MPN 3M925C3-4AClose Tolerance Screw
- 5305-01-513-9637 MPN ST3M557-4-5Close Tolerance Screw
- 5305-01-514-3360 MPN ST3M557-5-11Close Tolerance Screw
- 5306-00-291-5245 MPN ST3M453-5-8Close Tolerance Bolt
- 5306-01-045-9527 MPN VAL23607-3-26Shoulder Bolt
- 5306-01-141-4090 MPN VFK600-5H18FShear Bolt
- 5306-01-209-9297 MPN VAL23033-12H26XShoulder Bolt
- 5306-01-331-5788 MPN VAL23001-5D019Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-126-4721 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M714-7D49 | Boeing Company, The |
HT4049-7D49 | Hi-shear Corporation |
HT4049-7D49 | Sps Technologies, Llc |
HT4049-7D49 | Lisi Aerospace Canada Corp |
HT4049-7D49 | Alcoa Global Fasteners, Inc. |
HT4049-7D49 | Sps Technologies, Llc |
HT4049-7D49 | Arconic Global Fasteners & Rings, |
HT4049-7D49 | Huck International, Inc. |
ST3M714-7D49 | Fastener Innovation Technology, Inc. |
ST3M714-7D49 | Reid Products Inc. |
ST3M714-7D49 | West Coast Aerospace Inc |
ST3M714-7D49 | Sps Technologies Ltd Tj Brooks |
HT4049-7D49 | Huck Intl Inc |
10115140 | Nimikkeistokeskus Ncb Finland |
HT4049-7D49 | Sps Technologies, Llc |
ST3M714-7D49 | Valley-todeco, Inc. |
ST3M714-7D49 | Heartland Precision Fasteners, Inc. |
ST3M714-7D49 | Houston Precision Fasteners I, Lp |
HT4049-7D49 | Sps Technologies, Llc |