NSN 5305-01-127-8454
Panel Screw
0.250 inches fastener length, flat chamfer head style, 0.125 inches head diameter, head height: 0.070 inches .
Manufacturer part number 2797615-1 for national stock number 5305011278454.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-127-8454.
-
MPN or Model
2797615-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.120 inches -
Fastener Length
0.250 inches -
Head Style
Flat chamfer -
Head Diameter
0.125 inches -
Head Height
0.070 inches -
First Diameter From Head
0.086 inches -
Second Diameter From Head
0.054 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.111 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
0.130 inches -
Internal Drive Style
Slot -
Thread Diameter
0.086 inches -
Thready Qty Per Inch (tpi)
56 -
Askewed Head Angle
90.0 degrees -
Externally Relieved Body Diameter Quantity
2 -
Material
Steel comp 303 -
Material Specification
Qq-s-764, type 303, cond a federal specification single material response -
Thread Series Designator
Unc
More from these suppliers
- 5950-00-894-0888 MPN 1294551-1Radio Frequency Coil
- 5905-01-033-0354 MPN 1489231-000Noninductive Wire Wound Fixed Resistor
- 5950-01-337-5071 MPN 2804149-1Power Transformer
- 5935-01-123-9921 MPN 2801961-1Electrical Receptacle Connector
- 5905-01-222-0750 MPN 2800037-1Resistor Assembly
- 5950-01-386-5845 MPN 2808995-1Reactor
- 5950-00-221-2388 MPN 1915972-1Power Transformer
- 5305-00-693-7131 MPN 1210539-1Ternally E Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-127-8454 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
2797615-1 | Honeywell Intl Inc |
2797615-1 | Leonardo Mw Ltd |
797615-1 | Anders Williams Intl |