NSN 5305-01-128-2227
Tap Bolt
Between 0.302 inches and 0.323 inches fastener length, between 0.302 inches and 0.323 inches head height, between 0.7360 inches and 0.7500 inches width between flats, thread diameter: 0.500 inches.
Manufacturer part number MS35308-404 for national stock number 5305011282227.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-01-128-2227.
-
MPN or Model
MS35308-404
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
Between 0.302 inches and 0.323 inches -
Head Height
Between 0.302 inches and 0.323 inches -
Width Between Flats
Between 0.7360 inches and 0.7500 inches -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Material
Stainless steel -
Material Specification
Mil-i-17214 military specification single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ff-s-85 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-454-6905 MPN NAS1653-106PNFElectrical Plug Connector
- 5940-00-899-2182 MPN NAS705T1Stud Terminal
- 5940-01-059-9939 MPN NAS1745-23Conductor Splice
- 5935-01-616-1477 MPN MS3406D14S-2EElectrical Plug Connector
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5305-00-057-0518 MPN MS51958-21Machine Screw
- 5305-00-057-0524 MPN MS51958-28Machine Screw
- 5305-00-144-0345 MPN NAS1190-3T10FSocket Head Cap Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-01-128-2227 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35308-404 | National Aerospace Standards |
MS35308-404 | Military Standards |
Stock Check
- NS: 49
- NE: 79