NSN 5305-01-128-2927
High Torque Screw
Internal drive ribbed.
Manufacturer part number NAS1578-3-19 for national stock number 5305011282927.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-128-2927.
-
MPN or Model
NAS1578-3-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 1.536 inches and 1.566 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.360 inches and 0.374 inches -
Head Height
Between 0.115 inches and 0.125 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1578 professional/industrial association standard
More from these suppliers
- 5935-00-989-0884 MPN NAS1196-9Receptacle Dummy Connector
- 5940-01-380-7186 MPN NAS1063B121-140Terminal Board Marker Strip
- 5940-01-425-7560 MPN NAS1063A3-TB504AJTerminal Board Marker Strip
- 5305-00-059-9564 MPN NAS1221-4-12Machine Screw
- 5305-00-063-3099 MPN NAS1081-08B4Setscrew
- 5305-00-196-5395 MPN MS21093-0203Machine Screw
- 5305-00-206-1189 MPN NAS220-26Machine Screw
- 5305-00-263-8828 MPN NAS1220-08E2Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-128-2927 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578-3-19 | National Aerospace Standards |
NAS1578A3R19 | National Aerospace Standards |
NAS1578A3T19 | National Aerospace Standards |