NSN 5305-01-128-6655
High Torque Screw
0.687 inches fastener length, flat countersunk head style, between 0.231 inches and 0.279 inches head diameter, grip diameter: between 0.1365 inches and 0.1375 inches .
Manufacturer part number 72B235003-2001 for national stock number 5305011286655.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-128-6655.
-
MPN or Model
72B235003-2001
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Fastener Length
0.687 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.231 inches and 0.279 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 302 or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 310 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 347 or steel comp 309 -
Material Specification
Qq-s-763 federal specification all material responses -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 type 1, type 2, type 3 or type 6 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 1560-00-127-3465 MPN 32G32047-61Keel Web Assembly
- 1560-00-135-9582 MPN 32-32047-1659Keel Weld Assy
- 1560-00-231-9162 MPN 53-42001-24Door Strut Clip
- 1560-00-287-7059 MPN 68A113027-2017Wing Section Hinge
- 1560-00-327-1088 MPN 25-61342-7Stabilizer Piston Bearing
- 1560-00-390-6242 MPN 68A321082-2078Aircraft Skin
- 1560-00-517-9868 MPN 32-11046-21Center Wing Rib
- 1560-00-521-4496 MPN 53-73227-1Pylon Fitting Assy
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-128-6655 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
72B235003-2001 | Boeing Company, The |
72B235003-2001 | Boeing Company, The |