NSN 5305-01-129-0579
High Torque Screw
Between 2.448 inches and 2.478 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number HT4054-3-34A for national stock number 5305011290579.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-129-0579.
-
MPN or Model
HT4054-3-34A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 2.448 inches and 2.478 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 2.115 inches and 2.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488 type 2 class 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-492-6831 MPN SC2000B1032-18Machine Screw
- 5305-00-508-5087 MPN LS15267V3-24Machine Screw
- 5305-01-141-7913 MPN HT4008-5-20Shoulder Screw
- 5305-01-142-7221 MPN HT4020-5-15AYShoulder Screw
- 5305-01-209-9365 MPN HT4008-7-17Shoulder Screw
- 5305-01-212-0071 MPN HT4060V3-3DShoulder Screw
- 5305-01-348-6817 MPN CHT4068-5-7Close Tolerance Screw
- 5305-01-435-3851 MPN BACB30LU7-33Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-129-0579 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4054-3-34A | Huck International, Inc. |
HT4054-3-34A | Arconic Global Fasteners & Rings, |
HT4054-3-34A | Hi-shear Corporation |
HT4054-3-34A | Sps Technologies, Llc |
ST3M730-3L34 | Boeing Company, The |
HT4054-3-34A | Lisi Aerospace Canada Corp |
ST3M730-3L34 | Alcoa Global Fasteners, Inc. |
HT4054-3-34A | Huck Intl Inc |
HT4054-3-34A | Alcoa Global Fasteners, Inc. |