NSN 5305-01-129-2200
High Torque Screw
Between 1.547 inches and 1.577 inches fastener length, flat countersunk head style, between 0.612 inches and 0.672 inches head diameter, grip diameter: between 0.4365 inches and 0.4370 inches .
Manufacturer part number HT4041-7-16-9 for national stock number 5305011292200.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-129-2200.
-
MPN or Model
HT4041-7-16-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.537 inches and 0.587 inches -
Fastener Length
Between 1.547 inches and 1.577 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.612 inches and 0.672 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
23-112, ty d, fscm 76301 mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-478-0475 MPN 756432-1Machine Screw
- 5305-00-929-1621 MPN 51B222-23Machine Screw
- 5305-01-054-6265 MPN C7985-4-12Close Tolerance Screw
- 5305-01-105-9374 MPN HT4067-4-8DClose Tolerance Screw
- 5305-01-211-3105 MPN HT4009-3-22Shoulder Screw
- 5305-01-280-4799 MPN C7985-5-18Close Tolerance Screw
- 5305-01-303-8729 MPN HT4075D5-11-24Close Tolerance Screw
- 5305-01-348-7101 MPN SC5027-4-10Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-129-2200 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4041-7-16-9 | Hi-shear Corporation |
HT4041-7-16-9 | Sps Technologies, Llc |
HT4041-7-16-9 | Alcoa Global Fasteners, Inc. |
3M707-7-16-9 | Boeing Company, The |
HT4041-7-16-9 | Sps Technologies, Llc |
HT4041-7-16-9 | Arconic Global Fasteners & Rings, |
HT4041-7-16-9 | Huck International, Inc. |
3M707-7-16-9 | Sps Technologies, Llc |
HT4041-7-16-9 | Fastener Innovation Technology, Inc. |
11873-7-16-9 | Reid Products Inc. |
HT4041-7-16-9 | West Coast Aerospace Inc |
3M707-7-16-9 | Sps Technologies Ltd Tj Brooks |
HT4041-7-16-9 | Sps Technologies Inc |
HT4041-7-16-9 | Huck Intl Inc |
10115193 | Nimikkeistokeskus Ncb Finland |