NSN 5305-01-129-5531
High Torque Screw
Between 1.517 inches and 1.547 inches fastener length, flat countersunk head style, between 0.578 inches and 0.633 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number NAS665V17HT for national stock number 5305011295531.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-129-5531.
-
MPN or Model
NAS665V17HT
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.445 inches and 0.495 inches -
Fastener Length
Between 1.517 inches and 1.547 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.633 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Nas 621 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas665 professional/industrial association standard
More from these suppliers
- 5940-01-439-9041 MPN NAS1063A8-98AKTerminal Board Marker Strip
- 5935-01-589-4826 MPN NAS6606-50Electrical Receptacle Connector
- 5940-01-381-7134 MPN NAS1063B246-255Terminal Board Marker Strip
- 1680-01-668-8056 MPN NAS354-5-170Aircraft Control Tube Assembly
- 5305-00-003-9278 MPN NAS1221-4C42Machine Screw
- 5305-00-008-9114 MPN NAS1190E02T6LSocket Head Cap Screw
- 5305-00-051-6751 MPN MS16995-16Socket Head Cap Screw
- 5305-00-069-2597 MPN MS35202-71Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-129-5531 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS665V17HT | National Aerospace Standards |
10115197 | Nimikkeistokeskus Ncb Finland |