NSN 5305-01-129-6937
High Torque Screw
Between 0.360 inches and 0.390 inches fastener length, oval countersunk head style, between 0.297 inches and 0.302 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number 3930AS1210-3-2-4 for national stock number 5305011296937.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-129-6937.
-
MPN or Model
3930AS1210-3-2-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.225 inches and 0.275 inches -
Fastener Length
Between 0.360 inches and 0.390 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
23-112, fscm 76301 mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-512-8284 MPN 3M1169C4-10AFClose Tolerance Screw
- 5305-01-525-9813 MPN ST3M557-5-8Close Tolerance Screw
- 5305-00-082-1897 MPN 3MFR509-10R9Machine Screw
- 5305-00-546-4849 MPN 3MA509-516R12Machine Screw
- 5305-00-764-3020 MPN HT408A4-19Machine Screw
- 5305-01-043-5754 MPN HT8043-6-6Close Tolerance Screw
- 5305-01-054-6281 MPN VT1693F3-8Close Tolerance Screw
- 5305-01-067-5838 MPN C7984-3-17Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-129-6937 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3930AS1210-3-2-4 | Hi-shear Corporation |
3930AS1210-3-2-4 | Huck International, Inc. |
3930AS1210-3-2-4 | Arconic Global Fasteners & Rings, |
3930AS1210-3-2-4 | Naval Air Systems Command |
3930AS1210-3-2-4 | Sps Technologies, Llc |
3930AS1210-3-2-4 | Fastener Innovation Technology, Inc. |
3930AS1210-3-2-4 | West Coast Aerospace Inc |
3M707-3-2-4 | Sps Technologies Inc |
10115206 | Nimikkeistokeskus Ncb Finland |
3M707-3-2-4 | Arconic Global Fasteners & Rings, |
11873-3-2-4 | Reid Products Inc. |
3M707-3-2-4 | Sps Technologies, Llc |
3M707-3-2-4 | Boeing Company, The |
3M707-3-2-4 | Fastener Innovation Technology, Inc. |
3M707-3-2-4 | West Coast Aerospace Inc |
3M707-3-2-4 | Huck International, Inc. |
3M707-3-2-4 | Lisi Aerospace Canada Corp |
3M707-3-2-4 | Sps Technologies Ltd Tj Brooks |
3M707-3-2-4 | Hi-shear Corporation |
3M707-3-2-4 | Sps Technologies, Llc |
3M707-3-2-4 | Alcoa Global Fasteners, Inc. |
3M707-3-2-4 | Twist Tite Mfg, Inc |