NSN 5305-01-129-7596
High Torque Screw
Between 0.892 inches and 0.922 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.24950 inches .
Manufacturer part number HT4025L4D7 for national stock number 5305011297596.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-129-7596.
-
MPN or Model
HT4025L4D7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 0.892 inches and 0.922 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.24950 inches -
Shank Unthreaded Hole Diameter
0.075 inches first hole and 0.081 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.771 inches first hole and 0.811 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-079-7368 MPN NAS1190C06P10LSocket Head Cap Screw
- 5305-00-164-6992 MPN HT184-4-11Close Tolerance Screw
- 5305-00-541-9067 MPN NAS1189E08P7LSocket Head Cap Screw
- 5305-01-021-3747 MPN NAS1191-02P4NSocket Head Cap Screw
- 5305-01-046-3343 MPN ST3M495-5-8Shoulder Screw
- 5305-01-097-9882 MPN E723-409Socket Head Cap Screw
- 5305-01-106-3859 MPN HT4068-4-14Close Tolerance Screw
- 5305-01-126-7313 MPN HT4053-4-12AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-129-7596 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L4D7 | Hi-shear Corporation |
HT4025L4D7 | Sps Technologies, Llc |
HT4025L4D7 | Alcoa Global Fasteners, Inc. |
HT4025L4D7 | Huck International, Inc. |
HT4025L4D7 | Lisi Aerospace Canada Corp |
11905-4DL7 | Reid Products Inc. |
ST3M454-4DL7 | Boeing Company, The |
HT4025L4D7 | Huck Intl Inc |
10115210 | Nimikkeistokeskus Ncb Finland |