NSN 5305-01-129-7600
High Torque Screw
Between 1.785 inches and 1.815 inches fastener length, flat countersunk head style, between 0.880 inches and 0.890 inches head diameter, grip diameter: between 0.4365 inches and 0.4370 inches .
Manufacturer part number HT4025L7-18 for national stock number 5305011297600.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-129-7600.
-
MPN or Model
HT4025L7-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.650 inches and 0.700 inches -
Fastener Length
Between 1.785 inches and 1.815 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.880 inches and 0.890 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-182-9337 MPN CVC241A4-8Machine Screw
- 5305-00-316-7343 MPN HT4025L3-5Close Tolerance Screw
- 5305-00-505-2833 MPN LS15267V3-34Machine Screw
- 5305-01-050-1510 MPN HT4028L8-11MClose Tolerance Screw
- 5305-01-054-6238 MPN VT1696-6-23Close Tolerance Screw
- 5305-01-062-1058 MPN BACB30RF6P13Close Tolerance Screw
- 5305-01-132-6510 MPN HT4025L5-17Close Tolerance Screw
- 5305-01-223-3600 MPN SC1786RV3-13Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-129-7600 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L7-18 | Arconic Global Fasteners & Rings, |
HT4025L7-18 | Hi-shear Corporation |
HT4025L7-18 | Sps Technologies, Llc |
HT4025L7-18 | Lisi Aerospace Canada Corp |
HT295-7-18 | Hi-shear Corporation |
106830-7-18 | Sps Technologies, Llc |
HT4025L7-18 | Alcoa Global Fasteners, Inc. |
HT8140-7-18 | Alcoa Global Fasteners, Inc. |
HT4025L7-18 | Huck International, Inc. |
ST3M454-7L18 | Fastener Innovation Technology, Inc. |
HT4025L7-18 | Sps Technologies, Llc |
11905-7L18 | Reid Products Inc. |
WC4025L-7-18 | West Coast Aerospace Inc |
ST3M454-7L18 | Alcoa Global Fasteners, Inc. |
HT4025L7-18 | Sps Technologies Ltd Tj Brooks |
ST3M454-7L18 | Boeing Company, The |
BM19037-7-18 | Huck Intl Inc |
HT4025L7-18 | Huck Intl Inc |
HT8140-7-18 | Arconic Global Fasteners & Rings, |
BM19037-7-18 | Huck International, Inc. |