NSN 5305-01-129-9061
High Torque Screw
Furnished with one oring.
Manufacturer part number ST3M652C7-14A for national stock number 5305011299061.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-129-9061.
-
MPN or Model
ST3M652C7-14A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.630 inches and 0.697 inches -
Fastener Length
Between 1.515 inches and 1.562 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.881 inches and 0.888 inches -
Head Height
Between 0.130 inches and 0.133 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-283-4588 MPN ST3M430V5-7ASClose Tolerance Screw
- 5305-00-316-7343 MPN ST3M454-3L5Close Tolerance Screw
- 5305-01-138-7235 MPN ST3M454-7L25Close Tolerance Screw
- 5305-00-505-2802 MPN LS15267V3-50Machine Screw
- 5305-00-538-7413 MPN BACB30LU6-21Close Tolerance Screw
- 5305-01-535-6807 MPN 3M1170C47AClose Tolerance Screw
- 5306-00-149-1835 MPN VEP220555-12-38Machine Bolt
- 5306-00-869-7338 MPN 756104-131Assy Bolt Shoulder
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-129-9061 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M652C7-14A | Huck International, Inc. |
ST3M652C7-14A | Fastener Innovation Technology, Inc. |
ST3M652C7-14A | West Coast Aerospace Inc |
HT4020-7-14A | Hi-shear Corporation |
HT4020-7-14A | Sps Technologies, Llc |
HT4020-7-14A | Arconic Global Fasteners & Rings, |
HT4020-7-14A | Lisi Aerospace Canada Corp |
ST3M652C7-14A | Sps Technologies Ltd Tj Brooks |
ST3M652C7-14A | Boeing Company, The |
10115222 | Nimikkeistokeskus Ncb Finland |
ST3M652C7-14A | Valley-todeco, Inc. |
HT4020-7-14A | Sps Technologies, Llc |
ST3M652C7-14A | Heartland Precision Fasteners, Inc. |
ST3M652C7-14A | Houston Precision Fasteners I, Lp |
HT4020-7-14A | Sps Technologies, Llc |
HT4020-7-14A | Sps Technologies, Llc |
11925C7-14A | Reid Products Inc. |
HT4020-7-14A | Alcoa Global Fasteners, Inc. |
ST3M652C7-14A | Twist Tite Mfg, Inc |
ST3M652C7-14A | Reid Products Inc. |