NSN 5305-01-130-3271
High Torque Screw
Between 1.143 inches and 1.173 inches fastener length, flat countersunk head style, between 0.578 inches and 0.633 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number NAS665V11HT for national stock number 5305011303271.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-130-3271.
-
MPN or Model
NAS665V11HT
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.445 inches and 0.495 inches -
Fastener Length
Between 1.143 inches and 1.173 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.633 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Nas 621 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas665 professional/industrial association standard
More from these suppliers
- 5940-00-718-1721 MPN NAS70753Stud Terminal
- 5940-01-384-0179 MPN NAS1063A20-4MLSTerminal Board Marker Strip
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-007-6178 MPN NAS1100E02-13Machine Screw
- 5305-00-020-3728 MPN NAS1154-5WClose Tolerance Screw
- 5305-00-052-5916 MPN MS35198-60Machine Screw
- 5305-00-054-6668 MPN NAS1635-08-6PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-130-3271 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS665V11HT | National Aerospace Standards |