NSN 5305-01-130-5304
High Torque Screw
1.001 inches fastener length, pan no. 2 head style, 0.604 inches head diameter, head height: 0.182 inches .
Manufacturer part number NAS1578C5H8P for national stock number 5305011305304.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-130-5304.
-
MPN or Model
NAS1578C5H8P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.501 inches -
Fastener Length
1.001 inches -
Head Style
Pan no. 2 -
Head Diameter
0.604 inches -
Head Height
0.182 inches -
Grip Diameter
Between 0.3110 inches and 0.3112 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.313 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-439-4144 MPN NAS1063A14-1JTerminal Board Marker Strip
- 5940-01-447-9978 MPN NAS1063Terminal Board Marker Strip
- 5305-00-050-4220 MPN MS21295-14Socket Head Cap Screw
- 5305-00-057-0518 MPN MS51958-21Machine Screw
- 5305-00-060-9744 MPN MS24693-C287Machine Screw
- 5305-00-150-3370 MPN MS51976-72Setscrew
- 5305-00-182-1356 MPN MILS7839Machine Screw
- 5305-00-226-7238 MPN MS16995-84Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-130-5304 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578C5H8P | National Aerospace Standards |
NAS1218-5E-8P | National Aerospace Standards |