NSN 5305-01-130-9014
High Torque Screw
Between 1.139 inches and 1.186 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3108 inches and 0.3119 inches .
Manufacturer part number NAS335C10-5 for national stock number 5305011309014.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-130-9014.
-
MPN or Model
NAS335C10-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.505 inches and 0.572 inches -
Fastener Length
Between 1.139 inches and 1.186 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3108 inches and 0.3119 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.312 inches -
Grip Length
Between 0.614 inches and 0.634 inches -
Width Across Flats
Between 0.188 inches and 0.190 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas335 professional/industrial association standard
More from these suppliers
- 5930-00-806-7073 MPN NAS543-3Toggle Switch
- 5940-01-625-6038 MPN NAS1063F-1-2Terminal Board Marker Strip
- 5935-01-218-6323 MPN NAS1100C08-8Screw
- 5305-00-004-5103 MPN MS21262-63Socket Head Cap Screw
- 5305-00-007-9892 MPN NAS1102E04-12Machine Screw
- 5305-00-052-6941 MPN NAS1351C3-36Socket Head Cap Screw
- 5305-00-057-0528 MPN NASM51958Machine Screw
- 5305-00-059-4556 MPN NAS600-18PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-130-9014 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS335C10-5 | National Aerospace Standards |