NSN 5305-01-130-9020
High Torque Screw
Between 0.598 inches and 0.628 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1580A3H4T for national stock number 5305011309020.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-130-9020.
-
MPN or Model
NAS1580A3H4T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
9.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 0.598 inches and 0.628 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 or steel comp 4340 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5305-00-283-4584 MPN ST3M430V3-11Close Tolerance Screw
- 5305-00-399-0212 MPN HT4024L6-10Close Tolerance Screw
- 5305-00-505-2817 MPN LS15267V3-19Machine Screw
- 5305-01-133-2195 MPN HT4053-4-8Close Tolerance Screw
- 5305-01-161-6164 MPN HT4032V4-6Close Tolerance Screw
- 5305-01-166-6140 MPN BACB30LU4-21Close Tolerance Screw
- 5305-01-328-6171 MPN SC1785R-08-03Machine Screw
- 5305-01-345-8395 MPN HT4075V4-7-24Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-130-9020 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A3H4T | National Aerospace Standards |
NAS1580A3H4 | National Aerospace Standards |
GB510AE3-4 | Northrop Grumman Systems Corporation |
106712-3-4 | Sps Technologies, Llc |
HT8138-3-4 | Arconic Global Fasteners & Rings, |
BM19051-3-4 | Huck International, Inc. |
A146-3-4 | Huck Intl Inc |
BM19051-3-4 | Huck Intl Inc |
HT8138-3-4 | Alcoa Global Fasteners, Inc. |