NSN 5305-01-130-9475
High Torque Screw
3.625 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number AN101141 for national stock number 5305011309475.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-130-9475.
-
MPN or Model
AN101141
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.531 inches and 0.591 inches -
Fastener Length
3.625 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2460 inches and 0.2490 inches -
Internal Drive Style
W/o internal drive -
Thread Diameter
0.250 inches -
Grip Length
Between 0.252 inches and 0.312 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 8740 -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-090-4484 MPN AN4043-2Fuel Tank Cock-water Detector
- 5975-00-280-9189 MPN AN3054-28Electrical Conduit Coupling Nut
- 5935-00-552-3685 MPN AN3108B28-21PYElectrical Plug Connector
- 5945-00-552-5674 MPN AN3338-2Electromagnetic Relay
- 5935-00-148-9330 MPN AN3108B28-1PElectrical Plug Connector
- 5925-00-174-8804 MPN MS25005-10Circuit Breaker
- 5305-00-144-3748 MPN AN520-8R32Machine Screw
- 5305-00-150-9933 MPN AN526-428R9Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-130-9475 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN101141 | Aeronautical Standards Group |
Stock Check
- NS: 41
- NE: 639
- SV: 1