NSN 5305-01-131-3766
Bolt Stove
Between 0.281 inches and 0.312 inches fastener length, flat countersunk head style, between 0.147 inches and 0.172 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number FF-S-92 for national stock number 5305011313766.
Datasheet
-
Product description
Machine Screw NSN 5305-01-131-3766.
-
MPN or Model
FF-S-92
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.194 inches and 0.261 inches -
Fastener Length
Between 0.281 inches and 0.312 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.147 inches and 0.172 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.086 inches -
Thready Qty Per Inch (tpi)
56 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Criticality Code Justification
Zzzw -
Screw Material
Steel comp 301 or steel comp 302 or steel comp 302b or steel comp 303 or steel comp 303se or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 308 or steel comp 309 or steel comp 309s or steel comp 310 or steel comp 310s or steel comp 314 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 347 or steel comp 348 or steel comp 384 or steel comp 385 -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Special Test Features
Special quality control testing -
Test Data Document
81349-mil-p-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
3 type and 2c style -
Departure From Cited Document
As modified by material which must conform to ships parts control center special quality control provisions
More from these suppliers
- 5975-00-284-7340 MPN HHT791Flexible Nonmetallic Conduit
- 5975-00-855-7056 MPN WWC540Rigid Metal Conduit
- 5975-00-967-1269 MPN WC571Electrical Conduit Coupling
- 5930-01-147-8043 MPN 3-20ACLASS2DESIGNBToggle Switch
- 5925-01-104-3445 MPN W-C-375/14Circuit Breaker
- 5925-01-476-9720 MPN MS3320-D2VCircuit Breaker
- 5305-00-011-4409 MPN FFS92TYPE1STYLE1SMachine Screw
- 5305-00-016-9552 MPN FFS107TYPECSTYLE1STapping Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-131-3766 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FF-S-92 | Federal Specifications |