NSN 5305-01-131-5857
High Torque Screw
Between 5.870 inches and 5.917 inches fastener length, flat countersunk head style, between 0.950 inches and 1.017 inches head diameter, grip diameter: between 0.4982 inches and 0.4991 inches .
Manufacturer part number 106706H-8-A82 for national stock number 5305011315857.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-131-5857.
-
MPN or Model
106706H-8-A82
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.745 inches and 0.792 inches -
Fastener Length
Between 5.870 inches and 5.917 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.950 inches and 1.017 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.500 inches -
Grip Length
5.125 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas672 assn standard 1st treatment response or mil-c-8837, type 2, class 2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-080-0152 MPN 3MA334CFA5Machine Screw
- 5305-00-163-9778 MPN HT8039-4-5Close Tolerance Screw
- 5305-01-013-9598 MPN HT8177-7D19Close Tolerance Screw
- 5305-01-047-9442 MPN HT4024L6-12Close Tolerance Screw
- 5305-01-101-9438 MPN 3M925C3-4DClose Tolerance Screw
- 5305-01-158-6248 MPN ST3M455-9DL45Close Tolerance Screw
- 5305-01-236-6192 MPN VT1696-7-19Close Tolerance Screw
- 5305-01-303-5637 MPN SC1823-3-4PClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-131-5857 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106706H-8-A82 | Sps Technologies, Llc |
HT8171-8-82 | Alcoa Global Fasteners, Inc. |
H148-8-82 | Huck International, Inc. |
GB510CE8-82 | Northrop Grumman Systems Corporation |
106706H-8-A82 | Sps Technologies, Llc |
GB510CE8-82 | Arconic Global Fasteners & Rings, |
GB510CE8-82 | Sps Technologies, Llc |
GB510CE8-82 | Sps Technologies, Llc |
GB510CE8-82 | Hi-shear Corporation |
GB510CE8-82 | Lisi Aerospace Canada Corp |
H148-8-82 | Huck Intl Inc |
GB510BC8-82 | Northrop Grumman Systems Corporation |