NSN 5305-01-131-6730
High Torque Screw
Between 1.078 inches and 1.108 inches fastener length, oval countersunk head style, between 0.469 inches and 0.474 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number HT4053-5-9A for national stock number 5305011316730.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-131-6730.
-
MPN or Model
HT4053-5-9A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.506 inches and 0.556 inches -
Fastener Length
Between 1.078 inches and 1.108 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.469 inches and 0.474 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488, type 2, cl 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-054-6268 MPN C7985-4-4Close Tolerance Screw
- 5305-01-142-7191 MPN HT4041-4-4-5YShoulder Screw
- 5305-01-190-4563 MPN SC2174V04-3Machine Screw
- 5305-01-196-5579 MPN HT8137-5-18ASClose Tolerance Screw
- 5305-01-210-3854 MPN HT4068-3D3AClose Tolerance Screw
- 5305-01-215-0101 MPN HT4060V3-10ASShoulder Screw
- 5305-01-337-4887 MPN HT4075D4-14-53Close Tolerance Screw
- 5305-01-346-3765 MPN CHT4068-5-12Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-131-6730 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4053-5-9A | Hi-shear Corporation |
HT4053-5-9A | Huck International, Inc. |
HT4053-5-9A | Arconic Global Fasteners & Rings, |
ST3M740-5L9 | Boeing Company, The |
HT4053-5-9A | Sps Technologies, Llc |
ST3M740-5-9 | Boeing Company, The |
ST3M740-5L9 | Hi-shear Corporation |
ST3M740-5L9 | Alcoa Global Fasteners, Inc. |
ST3M740-5L9 | Lisi Aerospace Canada Corp |
HT4053-5-9A | Huck Intl Inc |
10115288 | Nimikkeistokeskus Ncb Finland |
HT4053-5-9A | Alcoa Global Fasteners, Inc. |