NSN 5305-01-131-6731
High Torque Screw
Furnished with one o-ring.
Manufacturer part number HT4020-7-16-9A for national stock number 5305011316731.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-131-6731.
-
MPN or Model
HT4020-7-16-9A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.537 inches and 0.587 inches -
Fastener Length
Between 1.547 inches and 1.577 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.881 inches and 0.888 inches -
Head Height
Between 0.130 inches and 0.133 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
Between 0.990 inches and 1.000 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Stainless steel -
Material Specification
23-112 fscm 76301 mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-045-4304 MPN HT4016-4-5YShoulder Screw
- 5305-01-059-1953 MPN BACB30LU4-29Close Tolerance Screw
- 5305-01-070-9156 MPN C7984-5-7Close Tolerance Screw
- 5305-01-131-2934 MPN CHT4057-5-11Close Tolerance Screw
- 5305-01-141-7194 MPN HT4020-5-22YShoulder Screw
- 5305-01-141-7195 MPN 3M902C5-9AShoulder Screw
- 5305-01-142-8407 MPN HT4020-4-16AYShoulder Screw
- 5305-01-211-7485 MPN SC1786R-3-02Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-131-6731 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4020-7-16-9A | Arconic Global Fasteners & Rings, |
3M950-7-16-9A | Fastener Innovation Technology, Inc. |
HT4020-7-16-9A | Hi-shear Corporation |
HT4020-7-16-9A | Sps Technologies, Llc |
HT4020-7-16-9A | Lisi Aerospace Canada Corp |
HT4020-7-16-9A | Alcoa Global Fasteners, Inc. |
3M950-7-16-9A | Alcoa Global Fasteners, Inc. |
3M950-7-16-9A | Boeing Company, The |
10115289 | Nimikkeistokeskus Ncb Finland |