NSN 5305-01-131-7558
High Torque Screw
Furnished with one o-ring.
Manufacturer part number ST3M652C5-11A for national stock number 5305011317558.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-131-7558.
-
MPN or Model
ST3M652C5-11A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.505 inches and 0.572 inches -
Fastener Length
Between 1.203 inches and 1.250 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.629 inches and 0.634 inches -
Head Height
Between 0.088 inches and 0.090 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
High-torque -
End Application
Aircraft, hornet f/a-18 (e/f); aircraft, hornet f/a-18 -
Thread Diameter
0.312 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-283-4579 MPN HT8137-3-4ASClose Tolerance Screw
- 5305-00-324-8519 MPN HT8137-4-8Close Tolerance Screw
- 5305-00-492-3092 MPN LS15264-04-8Machine Screw
- 5305-01-014-2587 MPN S5008-3-3Close Tolerance Screw
- 5305-01-034-2820 MPN SC1711-4-7Machine Screw
- 5305-01-049-2280 MPN ST3M496-4-4Shoulder Screw
- 5305-01-064-6265 MPN HT4025L5-8Close Tolerance Screw
- 5305-01-143-2829 MPN HT4009-3-16Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-131-7558 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M652C5-11A | Boeing Company, The |
HT4020-5-11A | Sps Technologies, Llc |
HT4020-5-11A | Hi-shear Corporation |
HT4020-5-11A | Lisi Aerospace Canada Corp |
HT4020-5-11A | Alcoa Global Fasteners, Inc. |
HT4020-5-11A | Arconic Global Fasteners & Rings, |
HT4020-5-11A | Huck International, Inc. |
ST3M652C5-11A | Fastener Innovation Technology, Inc. |
ST3M652C5-11A | West Coast Aerospace Inc |
ST3M652C5-11A | Sps Technologies Ltd Tj Brooks |
ST3M652C5-11A | Sps Technologies Inc |
HT4020-5-11A | Huck Intl Inc |
10115292 | Nimikkeistokeskus Ncb Finland |