NSN 5305-01-131-8169
High Torque Screw
Between 0.700 inches and 0.730 inches fastener length, flat countersunk head style, between 0.464 inches and 0.506 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1580A4R5 for national stock number 5305011318169.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-131-8169.
-
MPN or Model
NAS1580A4R5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 0.700 inches and 0.730 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.506 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 or steel comp 4340 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-435-3630 MPN NAS1063A6-510ATerminal Board Marker Strip
- 5305-00-151-0147 MPN NAS207-30Machine Screw
- 5305-00-225-9082 MPN MS90726-27Hexagon Head Cap Screw
- 5305-00-225-9093 MPN MS90726-38Hexagon Head Cap Screw
- 5305-00-226-7607 MPN MS16995-92Socket Head Cap Screw
- 5305-00-269-4218 MPN MS24694S160Machine Screw
- 5305-00-273-7397 MPN MS24677-63Socket Head Cap Screw
- 5305-00-299-7677 MPN MIL-S-7839Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-131-8169 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A4R5 | National Aerospace Standards |
NAS1580A4H5 | National Aerospace Standards |
Stock Check
- NS: 342
- NE: 5074