NSN 5305-01-132-3351
Panel Screw
0.625 inches fastener length, pan head style, between 0.205 inches and 0.219 inches head diameter, head height: between 0.070 inches and 0.080 inches .
Manufacturer part number 108888 for national stock number 5305011323351.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-132-3351.
-
MPN or Model
108888
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.188 inches -
Fastener Length
0.625 inches -
Head Style
Pan -
Head Diameter
Between 0.205 inches and 0.219 inches -
Head Height
Between 0.070 inches and 0.080 inches -
First Diameter From Head
0.080 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.437 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Criticality Code Justification
Zzzy -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 301 or steel comp 302 or steel comp 302b or steel comp 303 or steel comp 303se or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 308 or steel comp 309 or steel comp 309s or steel comp 310 or steel comp 310s or steel comp 314 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 347 or steel comp 348 or steel comp 384 or steel comp 385 -
Surface Treatment
Passivate -
Special Test Features
Special quality control testing -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Test Data Document
81349-mil-p-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unc -
Reference Number Differentiating Characteristics
As differentiated by material which must conform to ships parts control center special quality control provisions
More from these suppliers
- 5905-00-173-5682 MPN 533-00HS20KNonprecision Nonwire Wound Variable Resistor
- 5905-01-220-3432 MPN 126528-11Film Fixed Resistor
- 5935-01-469-1023 MPN 141590PC559Electrical Receptacle Connector
- 5935-01-475-0061 MPN 131832G1Electrical Plug Connector
- 5935-01-526-8465 MPN 156266-2Electrical Plug Connector
- 5930-01-215-0346 MPN 116771Rotary Switch
- 5905-00-222-7650 MPN 510-00HS2KNonprecision Wire Wound Variable Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-132-3351 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
108888 | Lockheed Martin Corporation |