NSN 5305-01-132-5285
High Torque Screw
Between 0.765 inches and 0.812 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1883 inches and 0.1894 inches .
Manufacturer part number NAS333CA6 for national stock number 5305011325285.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-132-5285.
-
MPN or Model
NAS333CA6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.380 inches and 0.447 inches -
Fastener Length
Between 0.765 inches and 0.812 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1883 inches and 0.1894 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.375 inches -
Width Across Flats
0.125 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas333 professional/industrial association standard
More from these suppliers
- 5940-00-056-8302 MPN NAS707T4Stud Terminal
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5935-00-153-4395 MPN NAS1642R16-24SNElectrical Receptacle Connector
- 5305-00-003-9211 MPN NAS1155V23Close Tolerance Screw
- 5305-00-008-5910 MPN NAS1189E3T10Socket Head Cap Screw
- 5305-00-008-7864 MPN NAS1631C2Machine Screw
- 5305-00-042-9478 MPN MS90725-90Hexagon Head Cap Screw
- 5305-00-052-6456 MPN NAS1351C3-8Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-132-5285 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS333CA6 | National Aerospace Standards |