NSN 5305-01-132-8496
Bolt Stove
Between 0.156 inches and 0.161 inches fastener length, flat countersunk head style, between 0.150 inches and 0.172 inches head diameter, internal drive style: slot.
Manufacturer part number A02H6011-2 for national stock number 5305011328496.
Datasheet
-
Product description
Machine Screw NSN 5305-01-132-8496.
-
MPN or Model
A02H6011-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.109 inches and 0.132 inches -
Fastener Length
Between 0.156 inches and 0.161 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.150 inches and 0.172 inches -
Internal Drive Style
Slot -
Thread Diameter
0.086 inches -
Thready Qty Per Inch (tpi)
56 -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel comp 303 -
Screw Material Specification
Astm a582 assn standard single material response -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 1560-00-151-4312 MPN A02E4082-34Scavenge Panel Assy
- 1680-00-827-0620 MPN 114CS120-1Thrus Boot Assembly
- 1680-01-106-2268 MPN 414C1163-1Bell Crank
- 1560-01-116-4217 MPN 114P5003-138Lower Panel Assy
- 1680-01-119-3361 MPN 145D3300-3Flexible Shaft Assembly
- 1560-01-258-6503 MPN 414S3104-21Bracket Relay
- 1560-01-368-9800 MPN 114S1821-5Aircraft Structural Component Fitting
- 1560-01-374-9465 MPN 114S1903-731Aircraft Structural Component Fitting
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-132-8496 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
A02H6011-2 | The Boeing Company |