NSN 5305-01-132-8528
High Torque Screw
Between 1.259 inches and 1.306 inches fastener length, flat countersunk head style, between 0.698 inches and 0.762 inches head diameter, grip diameter: between 0.6580 inches and 0.6582 inches .
Manufacturer part number BM19045-614A for national stock number 5305011328528.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-132-8528.
-
MPN or Model
BM19045-614A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.441 inches -
Fastener Length
Between 1.259 inches and 1.306 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.698 inches and 0.762 inches -
Grip Diameter
Between 0.6580 inches and 0.6582 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas672 assn standard 1st treatment response or mil-c-8837 type 2 class 2 military specification 2nd treatment response -
Thread Series Designator
Unjf -
Specification Data
26512-gb510n manufacturers standard
More from these suppliers
- 5305-00-001-8182 MPN 3MA334FA16Close Tolerance Screw
- 5305-00-420-6449 MPN NAS1133V3Close Tolerance Screw
- 5305-00-541-9045 MPN NAS1221-3-2Machine Screw
- 5305-00-838-5388 MPN NAS1101C02-12Machine Screw
- 5305-01-027-4665 MPN NAS1123E19HClose Tolerance Screw
- 5305-01-062-1058 MPN BACB30RF6P13Close Tolerance Screw
- 5305-01-072-9131 MPN NAS1101E4-27Machine Screw
- 5305-01-076-4930 MPN HT4020-4-9AXShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-132-8528 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM19045-614A | Huck International, Inc. |
SFH22D6A14 | Sps Technologies, Llc |
HT8181F6-14 | Alcoa Global Fasteners, Inc. |
HT326-6A14 | Hi-shear Corporation |
HT326-6A14 | Lisi Aerospace Canada Corp |
GB510CE6-14 | Northrop Grumman Systems Corporation |
BM19045-614A | Huck Intl Inc |
GB510N6A14 | Northrop Grumman Systems Corporation |
SFH22D6A14 | Sps Technologies, Llc |