NSN 5305-01-133-3879
High Torque Screw
Between 0.986 inches and 1.033 inches fastener length, flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number GB510DE410D for national stock number 5305011333879.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-133-3879.
-
MPN or Model
GB510DE410D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.351 inches and 0.418 inches -
Fastener Length
Between 0.986 inches and 1.033 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.071 inches first hole and 0.081 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.818 inches first hole and 0.850 inches first hole -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mil-c-8837 type 2 class 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-170-2942 MPN HT8138-3-4TClose Tolerance Screw
- 5305-00-505-2892 MPN LS15265V3-6Close Tolerance Screw
- 5305-00-536-7266 MPN HT4024L7-7Close Tolerance Screw
- 5305-00-903-6749 MPN 3001T93P01Machine Screw
- 5305-01-025-6964 MPN HT4017-08-7Close Tolerance Screw
- 5305-01-050-9678 MPN HT4009-4-13Shoulder Screw
- 5305-01-160-7561 MPN HT4027-5-18Close Tolerance Screw
- 5305-01-216-4350 MPN 3M1034V4-9-24Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-133-3879 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB510DE410D | Hi-shear Corporation |
GB510DE410D | Lisi Aerospace Canada Corp |
GB510DE410D | Northrop Grumman Systems Corporation |
GB510CS4HD10 | Northrop Grumman Systems Corporation |
79901HD-4-10 | Sps Technologies, Llc |
GB510DE410D | Arconic Global Fasteners & Rings, |
GB510DE410D | Sps Technologies, Llc |
GB510DE410D | Sps Technologies, Llc |
Stock Check
![](/public/images/partscage_shelf3.png)