NSN 5305-01-133-9441
High Torque Screw
Between 0.485 inches and 0.515 inches fastener length, flat countersunk head style, between 0.297 inches and 0.301 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4041-3-2-6 for national stock number 5305011339441.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-133-9441.
-
MPN or Model
HT4041-3-2-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
Between 0.485 inches and 0.515 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.297 inches and 0.301 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
23-112 fscm 76301 mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-487-5092 MPN VS2545T4F19TClose Tolerance Screw
- 5305-00-927-7904 MPN SC2219-06-2Close Tolerance Screw
- 5305-01-014-2588 MPN S5008-3-2Close Tolerance Screw
- 5305-01-055-8809 MPN BACB30LU5-12Close Tolerance Screw
- 5305-01-131-8168 MPN HT8137-4-15ASClose Tolerance Screw
- 5305-01-135-6489 MPN HT8137-5-14ASClose Tolerance Screw
- 5305-01-149-3057 MPN HT4049-4D14XShoulder Screw
- 5305-01-158-5371 MPN 3M893-3-9Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-133-9441 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4041-3-2-6 | Sps Technologies, Llc |
HT4041-3-2-6 | Hi-shear Corporation |
HT4041-3-2-6 | Arconic Global Fasteners & Rings, |
3M707-3-2-6 | Fastener Innovation Technology, Inc. |
WC4041-3-2-6 | West Coast Aerospace Inc |
HT4041-3-2-6 | Lisi Aerospace Canada Corp |
HT4041-3-2-6 | Sps Technologies, Llc |
HT4041-3-2-6 | Alcoa Global Fasteners, Inc. |
HT4041-3-2-6 | Huck International, Inc. |
11873-3-2-6 | Reid Products Inc. |
HT4041-3-2-6 | Sps Technologies Ltd Tj Brooks |
3M707-3-2-6 | Boeing Company, The |
HT4041-3-2-6 | Sps Technologies Inc |
HT4041-3-2-6 | Huck Intl Inc |
10115356 | Nimikkeistokeskus Ncb Finland |