NSN 5305-01-133-9443
High Torque Screw
Between 0.985 inches and 1.015 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number HT4049-5-10 for national stock number 5305011339443.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-133-9443.
-
MPN or Model
HT4049-5-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.350 inches and 0.400 inches -
Fastener Length
Between 0.985 inches and 1.015 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-501-4903 MPN VS3258C4G3-4Headle Shoulder Pin
- 5305-00-145-0904 MPN CVC241-3-7Machine Screw
- 5305-01-183-5876 MPN HT4049-3D17Close Tolerance Screw
- 5305-01-237-2782 MPN HT4057-4-11AClose Tolerance Screw
- 5305-01-304-1325 MPN SC5087-3-5PClose Tolerance Screw
- 5305-01-435-6369 MPN BACB30LU9-23Close Tolerance Screw
- 5305-01-448-2847 MPN VT1693-7-7RShoulder Screw
- 5305-01-500-8232 MPN TX1026C4-35AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-133-9443 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4049-5-10 | Huck International, Inc. |
HT4049-5-10 | Arconic Global Fasteners & Rings, |
HT4049-5-10 | Hi-shear Corporation |
HT4049-5-10 | Sps Technologies, Llc |
HT4049-5-10 | Lisi Aerospace Canada Corp |
HT4049-5-10 | Alcoa Global Fasteners, Inc. |
ST3M714-5-10 | Alcoa Global Fasteners, Inc. |
ST3M714-5-10 | Boeing Company, The |
HT4049-5-10 | Huck Intl Inc |
10115358 | Nimikkeistokeskus Ncb Finland |