NSN 5305-01-134-1973
High Torque Screw
Between 5.203 inches and 5.250 inches fastener length, flat countersunk head style, between 1.007 inches and 1.017 inches head diameter, grip diameter: between 0.4982 inches and 0.4991 inches .
Manufacturer part number NAS338CPA51 for national stock number 5305011341973.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-134-1973.
-
MPN or Model
NAS338CPA51
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.755 inches and 0.822 inches -
Fastener Length
Between 5.203 inches and 5.250 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.007 inches and 1.017 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.500 inches -
Grip Length
Between 4.428 inches and 4.448 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas338 professional/industrial association standard
More from these suppliers
- 5935-00-817-9981 MPN NAS714-15Electrical Receptacle Connector
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 5305-00-038-8396 MPN MS16208-136Hexagon Head Cap Screw
- 5305-00-054-5660 MPN MS24677-122Socket Head Cap Screw
- 5305-00-080-9237 MPN NAS584-10TMachine Screw
- 5305-00-107-9231 MPN NAS1134V54Close Tolerance Screw
- 5305-00-136-9897 MPN NAS1635-00-12Machine Screw
- 5305-00-159-5554 MPN NAS1101E08-8Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-134-1973 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS338CPA51 | National Aerospace Standards |