NSN 5305-01-135-1124
Panel Screw
0.450 inches fastener length, flat chamfer head style, between 0.256 inches and 0.270 inches head diameter, head height: between 0.087 inches and 0.097 inches .
Manufacturer part number 2801285-4 for national stock number 5305011351124.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-135-1124.
-
MPN or Model
2801285-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.250 inches -
Fastener Length
0.450 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.256 inches and 0.270 inches -
Head Height
Between 0.087 inches and 0.097 inches -
First Diameter From Head
0.095 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.200 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Askewed Head Angle
90.0 degrees -
Externally Relieved Body Diameter Quantity
1 -
Material
Stainless steel -
Thread Series Designator
Unc
More from these suppliers
- 5930-00-999-0160 MPN 1851675-1Rotary Switch
- 5950-01-487-6883 MPN 1813240-1Power Transformer
- 5950-01-258-6776 MPN 2802499-1Electrical Coil
- 5305-00-215-6530 MPN 92551000300Machine Screw
- 5305-00-487-6108 MPN 240-210SSScrew-flat Fil-hd S
- 5305-00-527-3353 MPN 3002041-2120Machine Screw
- 5305-00-637-5692 MPN 92551020600Machine Screw
- 5305-00-656-0141 MPN MF1L0610SCPMachine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-135-1124 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
2801285-4 | Honeywell Intl Inc |