NSN 5305-01-135-1151
High Torque Screw
Between 1.839 inches and 1.886 inches fastener length, flat countersunk head style, between 0.573 inches and 0.635 inches head diameter, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number H148-5-22 for national stock number 5305011351151.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-135-1151.
-
MPN or Model
H148-5-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.454 inches and 0.521 inches -
Fastener Length
Between 1.839 inches and 1.886 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.573 inches and 0.635 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837 type 2 cl 2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-395-3437 MPN HT4024L5-14-1Close Tolerance Screw
- 5305-01-025-6961 MPN HT4049-4D14Close Tolerance Screw
- 5305-01-056-0173 MPN BACB30LH4U5Close Tolerance Screw
- 5305-01-108-7481 MPN NAS1124E2HClose Tolerance Screw
- 5305-01-141-7190 MPN HT4049-6D14XShoulder Screw
- 5305-01-141-7197 MPN 3M902C5-21AShoulder Screw
- 5305-01-142-9917 MPN HT4020-7-17YShoulder Screw
- 5305-01-152-5623 MPN HT123-5-9Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-135-1151 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
H148-5-22 | Huck International, Inc. |
GB510BC5-22 | Northrop Grumman Systems Corporation |
106706H-5-A22 | Sps Technologies, Llc |
HT8171-5-22 | Alcoa Global Fasteners, Inc. |
H148-5-22 | Huck Intl Inc |
106706H-5-A22 | Sps Technologies, Llc |
GB510BC5-22 | Northrop Grumman Systems Corporation |
106706H-5-A22 | Sps Technologies, Llc |
HT8171-5-22 | Alcoa Global Fasteners, Inc. |
106706H-5-A22 | Sps Technologies, Llc |
H148-5-22 | Huck Intl Inc |