NSN 5305-01-135-1152
High Torque Screw
Between 1.771 inches and 1.818 inches fastener length, flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number 106706H-4-A22 for national stock number 5305011351152.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-135-1152.
-
MPN or Model
106706H-4-A22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.386 inches and 0.453 inches -
Fastener Length
Between 1.771 inches and 1.818 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837 type 2 cl 2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-008-6405 MPN DFP79005-10B3Panel Screw Assembly
- 5305-01-044-2247 MPN HT4020-5-9Close Tolerance Screw
- 5305-01-045-9634 MPN HT4009-4-7Shoulder Screw
- 5305-01-051-4325 MPN BACS12GM3-20Machine Screw
- 5305-01-168-7738 MPN DCT7900-8-B-2Panel Screw Assembly
- 5305-01-197-8272 MPN HT4053-4D12AClose Tolerance Screw
- 5305-01-210-9441 MPN 720285-63Panel Screw Assembly
- 5305-01-284-8757 MPN VT1694F4-18Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-135-1152 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106706H-4-A22 | Sps Technologies, Llc |
GB510BC4-22 | Northrop Grumman Systems Corporation |
H148-4-22 | Huck International, Inc. |
HT8171-4-22 | Alcoa Global Fasteners, Inc. |
H148-4-22 | Huck Intl Inc |
106706H-4-A22 | Sps Technologies, Llc |
106706H-4-A22 | Sps Technologies, Llc |
GB510BC4-22 | Northrop Grumman Systems Corporation |
HT8171-4-22 | Alcoa Global Fasteners, Inc. |
106706H-4-A22 | Sps Technologies, Llc |
H148-4-22 | Huck Intl Inc |