NSN 5305-01-135-2402
High Torque Screw
Between 1.714 inches and 1.761 inches fastener length, flat countersunk head style, between 0.573 inches and 0.635 inches head diameter, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number H148-5-20 for national stock number 5305011352402.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-135-2402.
-
MPN or Model
H148-5-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.454 inches and 0.521 inches -
Fastener Length
Between 1.714 inches and 1.761 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.573 inches and 0.635 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837 type 2 cl 2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-462-5131 MPN NAS1133V25Close Tolerance Screw
- 5305-00-971-7414 MPN NAS1189-08T6Socket Head Cap Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-054-6261 MPN H185-3-6Close Tolerance Screw
- 5305-01-116-1198 MPN BM21010-3-15Shoulder Screw
- 5305-01-125-1197 MPN E723-272Socket Head Cap Screw
- 5305-01-141-7191 MPN 3M902C7-23DShoulder Screw
- 5305-01-141-7192 MPN HT4020-6-14AYShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-135-2402 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
H148-5-20 | Huck International, Inc. |
HT8171-5-20 | Alcoa Global Fasteners, Inc. |
GB510BC5-20 | Northrop Grumman Systems Corporation |
106706H-5-A20 | Sps Technologies, Llc |
H148-5-20 | Huck Intl Inc |
106706H-5-A20 | Sps Technologies, Llc |
HT8171-5-20 | Alcoa Global Fasteners, Inc. |
GB510BC5-20 | Northrop Grumman Systems Corporation |
106706H-5-A20 | Sps Technologies, Llc |
106706H-5-A20 | Sps Technologies, Llc |
H148-5-20 | Huck Intl Inc |